Practical guides · Settling in and public services · In-depth article

Renting a Victorian apartment on an embedded network? Check the first electricity bill

Find out who supplies your apartment, match the opening meter read to your move-in date and compare charges with the Victorian cap. Keep the right records if you need to dispute a charge.

AOTU editorial team

Task: Set up accounts and get documents. Check the article for who and where it applies to.

Based on: www.consumer.vic.gov.au; retrieved: 2026-11-18.

Your first electricity bill arrives from an unfamiliar company and starts before you collected the keys. Put the lease, handover date and the bill side by side. Check whether the apartment is on an embedded network and ask which meter and dates the operator used for your account. [E1] [E2]

Find out who bills you before signing the lease

Victorian rental providers must disclose an embedded electricity network before you sign. Ask the agent or building manager for the supplier’s name, account opening instructions, current rates and complaints contact. If you have moved in, check the name on the bill and ask the building manager to confirm it. The Victorian regulator’s public register can also help you identify the network. [E1] [E2]

At handover, record the unit, opening date, meter number and dated reading if you can get to the meter safely. If it is in a locked room, ask the building manager or operator for the meter number and opening reading in writing. Keep the reply with the lease. [E2] [E4]

Check the dates and meter first, then compare the rates

For example, you collected the keys on the 10th and the bill starts on the 1st. Send the handover evidence and bill to the operator. Ask which meter and opening reading it used and whether it will correct the dates and recalculate the charge. [E2] [E4]

Once the dates match, check the daily supply charge, price per kWh, tax basis and whether the meter read was estimated. On a single-rate bill for 14 days and 60 kWh, start with 14 daily charges plus 60 kWh at the usage rate. If prices vary by time of use, check each period separately. [E1] [E2]

The Victorian Default Offer caps residential embedded network electricity prices. Use the regulator’s tariff page linked by Consumer Affairs Victoria and select the table for the billing period, distribution zone and tariff type. Compare the rates shown on your own bill. The total also reflects the length of the billing period, usage and any other line items. [E1]

Add up charges from both parties before switching

Ask a prospective retailer whether it can serve your meter, whether any metering changes are needed and what the usage, supply and one-off charges would be. Ask the embedded network operator which network charges it would still bill. Compare the combined cost using the same period and usage. [E3]

To dispute a bill, contact the operator first with the period, meter number, disputed line, supporting evidence and what you want corrected. Keep the complaint reference and the reply. If you cannot resolve it, send the bill, handover or lease evidence, readings and correspondence to the Energy and Water Ombudsman Victoria. You can still ask EWOV for help identifying the operator if it does not appear on the member list. [E2] [E4]

Comments

Share a related experience or ask about the article

No comments yet. Ask a question about the article.

Sign in to discuss

Keep the discussion about the content. Do not post private information or advertisements.

Like 0